
Most St. Louis County cities currently require an occupancy inspection when a home sells, but not all of them. Ballwin, Brentwood, Ellisville, Kirkwood, Maplewood, Richmond Heights, Sunset Hills, and Webster Groves require one, and so does St. Louis County for unincorporated areas such as Mehlville; Arnold in Jefferson County requires both a city and a fire district inspection. Clayton, Des Peres, Fenton and Ladue do not require a city inspection just because an existing owner-occupied home is sold. Where an inspection is required, the seller usually arranges it, required violations must be corrected under the city’s rules, and the new occupant needs an occupancy permit before moving in.
How Do Occupancy Inspections Work in St. Louis County?
Why Do the Rules Differ From City to City?
St. Louis County is made up of dozens of municipalities, and each one sets its own housing and property maintenance rules. Missouri law says that no political subdivision can require a home inspection before a residential sale, but the same law exempts inspections tied to new construction and occupancy permits. That is why some cities have no resale inspection at all, while others still inspect a home before a new occupant can move in.
The practical point is that selling a home and getting permission to live in it are two different things. A city may not care that a deed changed hands, yet still require an inspection and permit before anyone occupies the house.
How Do You Know Which Rules Apply to Your Address?
Start with the property’s actual jurisdiction, not its mailing address. A Ballwin or Fenton mailing address can belong to a home outside city limits, and those homes follow St. Louis County or Jefferson County rules instead. Once you know the city or county, check its official page for whether an inspection is currently required, who applies, current fees, and how reinspections are scheduled.
We confirm which city or county rules apply at the very start of every sale we work on. It only takes a few minutes, and it helps avoid a last-minute surprise right before closing.
Who Usually Orders the Inspection?
In most sales, the seller or listing agent applies for the inspection and handles any required corrections, while the buyer or new occupant applies for the occupancy permit afterward. Each city sets its own procedure, so who does what should be settled early and written into the purchase agreement.
Which St. Louis County Cities Require an Occupancy Inspection?
The cities below currently require an inspection, a permit or both when ownership or occupancy changes. Their safety concerns are similar, but their procedures, fees and timelines are not.
Does Ballwin Require an Occupancy Inspection When a Home Sells?
Yes. Ballwin currently requires an occupancy inspection to confirm a home meets its housing code, and new occupants must get an occupancy permit before moving in. The rule applies inside city limits, so confirm the home is actually in Ballwin before assuming it applies. Confirm the current fee with Ballwin’s Building Inspections Department. Our Ballwin guide covers the city’s other rules for buyers and sellers.
Does Brentwood Require an Occupancy Inspection When a Home Sells?
Yes. Brentwood currently requires an occupancy permit at every ownership or tenant change, and the city, not St. Louis County, performs the inspection. The city currently charges $45 for the inspection and $25 for the permit. Homes with a chimney also need a Level 2 chimney inspection by a contractor licensed with Brentwood, and a passed chimney inspection is currently valid for two years. That chimney step catches sellers off guard more than anything else in Brentwood, so we schedule it early. More in our Brentwood guide.
Does Ellisville Require an Occupancy Inspection When a Home Sells?
Yes. Ellisville currently requires an occupancy inspection before a change of ownership or occupancy, and the city suggests scheduling it several weeks before the new owner takes possession. After the home passes, the city issues a Certificate of Compliance, and the new occupant completes the occupancy permit. Fees apply and are listed on the city’s page. See our Ellisville guide for more.
Does Kirkwood Require an Occupancy Inspection When a Home Sells?
Yes. Kirkwood currently requires an occupancy permit and inspection when occupancy changes, including sales. The seller usually applies, and the new occupant receives an Occupancy Certificate once the home passes. With Kirkwood’s many older homes, we look closely at stairways, handrails and past improvements before the inspector arrives. Our Kirkwood guide has more.
Does Maplewood Require an Occupancy Inspection When a Home Sells?
Yes. Maplewood currently inspects owner-occupied single-family homes when ownership changes and inspects rentals annually. The owner is responsible for scheduling the inspection and correcting violations, and every occupant needs an occupancy permit before moving in. More in our Maplewood guide.
Does Richmond Heights Require an Occupancy Inspection When a Home Sells?
Yes. Richmond Heights currently requires a code-compliance inspection before an occupancy permit is issued to a new occupant. The owner or agent requests it, and the resulting certificate of compliance is valid for a limited time, so timing matters if a closing slips. Fees are listed in the city code. See our Richmond Heights guide.
Does Sunset Hills Require an Occupancy Inspection When a Home Sells?
Yes. Sunset Hills currently requires an occupancy permit whenever occupancy is established or changes, including sales. Sellers usually arrange the inspection, though the owner is ultimately responsible. The inspection fee is currently a flat $25, and an application stays valid for up to six months. More in our Sunset Hills guide.
Does Webster Groves Require an Occupancy Inspection When a Home Sells?
Yes. Webster Groves currently requires a housing inspection when ownership or occupancy changes, and violations must be corrected before anyone moves in. The city does allow a home to be sold as-is with the buyer taking on agreed repairs, but the home still cannot be occupied until those violations are fixed. After the home passes, the city issues a Certificate of Compliance, and the new occupant needs a separate occupancy permit. See our Webster Groves guide.
Does the Mehlville Area Require an Occupancy Inspection?
Yes. Mehlville is unincorporated, so St. Louis County currently handles the occupancy inspection and permit for sales and rentals. The county contacts the applicant to schedule, and the home cannot be occupied until the permit is issued. The same county process applies to other unincorporated addresses, including some homes with Ballwin or Fenton mailing addresses. More in our Mehlville guide.
Does Arnold Require an Occupancy Inspection When a Home Sells?
Yes. Although Arnold is in Jefferson County, the city currently requires a property maintenance inspection and Certificate of Compliance when ownership changes, plus a separate Rock Community Fire District inspection. After both pass, the new occupant gets an occupancy permit, which has no separate city fee. Because two inspections are involved, Arnold sales need the earliest start of any town on this list. See our Arnold guide.
Which Cities Don’t Require an Inspection Just Because a Home Sells?
These cities do not currently require a city inspection solely because an existing owner-occupied home changes hands. Building permits, rental rules and inspections tied to past renovations still apply.
Does Clayton Require an Occupancy Inspection When a Home Sells?
No, not for an owner-occupied resale. The Clayton Building Division does currently require occupancy permits for rental properties, including when tenants change, so a home that has been rented or recently renovated deserves a quick check. See our Clayton guide.
Does Des Peres Require an Occupancy Inspection When a Home Sells?
No. According to the city’s permit and inspection information, Des Peres does not require municipal or fire inspections solely because an existing home is sold. Past renovations should still have their permits and final approvals in order. More in our Des Peres guide.
Does Fenton Require an Occupancy Inspection When a Home Sells?
No, not inside city limits. The City of Fenton currently requires occupancy permits for newly built homes, not for the resale of existing ones. Many Fenton mailing addresses are outside the city, though, and those homes may fall under St. Louis County or Jefferson County rules. See our Fenton guide.
Does Ladue Require an Occupancy Inspection When a Home Sells?
Not as a blanket rule. The Ladue Building Department currently requires occupancy permits in specific situations, such as new construction, homes vacant for an extended period and substantial alterations. Before closing, it is worth confirming there are no open permits or missing final inspections. More in our Ladue guide.
What Do Occupancy Inspectors Commonly Flag?
What Problems Most Often Hold Up an Occupancy Inspection?
Each city uses its own code, but the same kinds of items come up again and again in the sales we handle. Sunset Hills’ published checklist, for example, covers structural soundness, safe stairs, plumbing, utilities, smoke detectors and drainage. The issues we watch for most often are:
- Basement stairways without a handrail or side protection
- Deteriorated or unsafe stairs, porches and decks
- Missing or non-working smoke detectors
- Electrical hazards, gas defects and plumbing leaks
- Structural damage or deterioration
- Improvements finished without the required permits
Many of these are inexpensive to fix. A homeowner may have used a basement stair without a handrail for decades without a second thought, but an inspector can still require one. Items involving wiring, gas lines or plumbing usually need a licensed contractor, which adds scheduling time.
Can Work Done Without Permits Cause Problems?
Yes. A finished basement, a new bathroom, rewired circuits or a deck can look complete and still lack the permit and final inspection the city expects. When that comes up during a sale, the city may want the work reviewed, opened up or corrected before it signs off. If you are not sure whether past work was permitted, find out before you list rather than during the inspection.
Can an Occupancy Inspection Delay a Closing?
Yes. A common scenario we plan around looks like this: the inspector flags a basement stair with no handrail and questions electrical work in a finished basement. The handrail takes an afternoon. The electrical question means finding a licensed electrician, possibly pulling a permit, and waiting for a reinspection. The cost is often manageable; the time is what pushes a closing date. Starting the inspection process when the home is listed, not after it goes under contract, gives that work room to happen.
How Is a City Inspection Different From a Buyer’s Home Inspection?
A city occupancy inspection checks whether the home meets that city’s property maintenance and safety requirements for occupancy. A buyer’s private home inspection is a much broader look at the home’s condition, from the roof and foundation to the furnace and water heater, and it is for the buyer’s information and negotiation.
Does Passing the City Inspection Mean the House Is in Good Shape?
No. Passing means the home met the city’s requirements on the day of the inspection. It says nothing about an aging roof, a tired furnace or a foundation crack that does not violate the code. Buyers should treat the two inspections as separate steps and get their own inspection either way.
Which Repairs Are Negotiable and Which Are Required?
Items from the buyer’s private inspection are negotiable: the seller can make repairs, offer a credit, adjust the price, or the buyer can accept the item as-is. Items the city requires for occupancy are different, because a credit between buyer and seller does not satisfy the city. For example, the parties can agree on a credit for an older air conditioner, but if the city requires a handrail, the handrail still has to be installed before anyone moves in.
Can You Sell a House As-Is If It Needs Occupancy Repairs?
Selling as-is describes what the seller agrees to do under the contract; it does not override the city’s occupancy rules. Some cities, such as Webster Groves, allow the buyer to take on required corrections, but the home still cannot be occupied until the work is done and approved. Other cities expect compliance before the certificate or permit is issued.
Before agreeing to an as-is sale with open city items, both sides should know which violations must be fixed, who will do and pay for the work, whether the city allows that arrangement, and whether the buyer can move in before it is finished. Confirm any special arrangement directly with the city, and take legal questions about the contract to an attorney.
How Should Sellers Prepare for an Occupancy Inspection?
Should You Get a Pre-Listing Inspection?
For older homes, homes with deferred maintenance or homes with significant renovations, a private pre-listing inspection is often worth it. It shows you likely problems while you still have time to get contractor quotes and decide what to fix, instead of learning about them from a buyer’s inspector or the city with a closing date bearing down. It does not replace a required city inspection.
How Does Mavromatis Properties Help Sellers Prepare?
Our approach starts before the home is listed. We confirm which city or county rules apply, walk the home and point out the items most likely to come up in a city inspection, and talk through practical ways to resolve them. When repairs are needed, we help sellers line up contractors, keep paid invoices and any lien waivers organized, and make sure required permits and final approvals are in hand before closing.
We also put disclosure first. Known problems such as water intrusion, structural issues or past repairs belong on the Seller’s Disclosure whether or not the city inspects, and passing a city inspection does not change that. We cannot promise any inspection result, because inspectors apply their own codes, but we can make sure there are very few surprises. If you are getting ready to sell, our seller services page explains how we work.
Get Straightforward Help With Occupancy Inspections in St. Louis
If you are selling in St. Louis County, the real question is which repairs your city will require, what they are likely to cost, and how they could affect your closing or the buyer’s move-in date. Contact Mavromatis Properties for honest, straightforward help reviewing your city’s requirements, running the numbers, and talking through your options in the St. Louis market.



